This industrial O-ring features robust Buna-N sealing capabilities with the exceptional strength and corrosion resistance of Titanium Grade 5. Precisely manufactured for demanding applications requiring reliable and long-lasting seals.
| Standard | ASME B18 |
| Material | Titanium Grade 5 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 4.721" |
| Outside Diameter | 10.425" |
| Cross Section | 0.167" |
Manufactured under strict quality controls, this industrial O-ring exhibits superior chemical resistance typical of Buna-N rubber, making it suitable for a wide range of fluids and gases. The inclusion of Titanium Grade 5 in its composition provides unparalleled strength, rigidity, and excellent corrosion resistance, especially in harsh or high-temperature environments. With an Inside Diameter of 4.721 inches, an Outside Diameter of 10.425 inches, and a Cross Section of 0.167 inches, this O-ring is engineered for precise fitment and reliable performance in critical sealing applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating groove surfaces are clean and free from debris or damage. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp edges. 3. Gently seat the O-ring into its designated groove, ensuring it lies flat and is not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, which can crush the O-ring and compromise the seal. | Torque fasteners to the manufacturer's recommended specifications, using a calibrated torque wrench. |
| Using incompatible lubricants or sealants that can degrade the Buna-N material. | Consult the material compatibility chart for Buna-N and select only approved lubricants or sealants. |
A: This Industrial O-Ring, Buna-N is manufactured from Titanium Grade 5.
A: Hydraulic systems, Pneumatic systems, Chemical processing equipment, Aerospace components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||