This industrial O-ring, constructed from durable Buna-N with a polycarbonate housing, offers superior sealing performance. Its precise dimensions ensure a tight fit in critical applications.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.046" |
| Outside Diameter | 1.310" |
| Cross Section | 0.195" |
Specified by design engineers worldwide, this Buna-N O-ring features a nominal Inside Diameter of 7.046 inches, an Outside Diameter of 1.310 inches, and a Cross Section of 0.195 inches. The robust Buna-N material provides excellent resistance to oils, fuels, and many hydraulic fluids, making it ideal for demanding industrial environments. The inherent properties of Buna-N also contribute to good abrasion resistance and a wide operating temperature range, ensuring reliable sealing across diverse applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully install the O-ring into the groove, avoiding stretching or twisting. 3. Apply even pressure to seat the O-ring fully within the groove before assembling mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the gland assembly, causing excessive compression and premature failure of the O-ring. | Adhere strictly to recommended gland design and assembly torque specifications to prevent over-compression. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Consult chemical compatibility charts and use only lubricants and cleaning agents approved for Buna-N applications. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic Systems, Pneumatic Actuators, Automotive Fuel Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||