This industrial O-ring, constructed from robust Buna-N with integrated Nylon reinforcement, offers exceptional sealing performance under extreme conditions. Engineered for reliability and durability.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 9.797" |
| Outside Diameter | 4.317" |
| Cross Section | 0.206" |
Specified by design engineers worldwide, this Buna-N industrial O-ring with a Nylon reinforcement matrix provides superior resistance to abrasion and extrusion. It boasts an Inside Diameter of 9.797 inches, an Outside Diameter of 4.317 inches, and a precise Cross Section of 0.206 inches. The combination of Buna-N's excellent oil and fuel resistance with Nylon's structural integrity makes this seal ideal for high-pressure hydraulic systems, automotive applications, and general industrial machinery where robust sealing is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating grooves are clean, dry, and free of burrs or sharp edges. 2. Carefully stretch the O-ring over the smaller diameter or into the groove, avoiding excessive tension or twisting. 3. Gently seat the O-ring within its designated groove, ensuring no pinching or damage occurs during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or tools that can nick or cut the O-ring during installation. | Employ a rounded installation tool or use lubrication to facilitate smooth insertion without damaging the seal. |
| Incorrectly measuring or specifying O-ring dimensions, leading to improper fit and seal failure. | Always verify O-ring dimensions against the groove specifications and consult engineering drawings for accurate sizing. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic cylinders and pumps, Automotive fuel systems, Industrial valve seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||