This high-performance industrial O-ring, constructed from robust Buna-N with a nylon reinforcing layer, ensures superior sealing integrity. Engineered for resilience and durability in challenging environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 6.699" |
| Outside Diameter | 2.246" |
| Cross Section | 0.249" |
Trusted by engineers across multiple sectors, this industrial O-ring is meticulously crafted from a Buna-N elastomeric compound, reinforced with a woven nylon matrix for enhanced tensile strength and reduced extrusion. Its precise dimensions, including an inside diameter of 6.699 inches, an outside diameter of 2.246 inches, and a cross-section of 0.249 inches, guarantee a precise fit and reliable seal in critical fluid and gas systems. The Buna-N material offers excellent resistance to petroleum-based oils, hydraulic fluids, and many solvents, making it ideal for a wide range of industrial machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating groove and sealing surfaces thoroughly to remove any debris or contaminants. 2. Lightly lubricate the O-ring and groove with a compatible lubricant approved for Buna-N and the specific application fluid. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly and without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, leading to O-ring degradation or seal failure. | Always consult material compatibility charts and select a lubricant specifically approved for Buna-N and the operating environment. |
| Forcing the O-ring into the groove, causing nicks, cuts, or stretching. | Ensure the groove is clean and properly sized. Use appropriate installation tools if necessary and avoid excessive force. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Cylinders, Fuel Systems, Oil and Gas Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||