This industrial O-ring, constructed from robust Buna-N and encased in carbon steel, offers exceptional sealing performance. Engineered for reliability in demanding applications, it ensures leak-free operation and longevity.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 9.410" |
| Outside Diameter | 1.338" |
| Cross Section | 0.101" |
Built to exacting engineering tolerances, this Buna-N O-ring features an inside diameter of 9.410 inches, an outside diameter of 1.338 inches, and a precise cross-section of 0.101 inches. The Buna-N (Nitrile Butadiene Rubber) material provides excellent resistance to oils, fuels, and many hydraulic fluids, making it suitable for a wide range of industrial sealing applications. The carbon steel casing enhances its structural integrity and provides additional protection against abrasion and wear, ensuring dependable sealing in dynamic and static systems where robustness is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free from debris, and properly dimensioned. 2. Carefully inspect the O-ring for any nicks, cuts, or imperfections before installation. 3. Gently stretch or compress the O-ring to fit into the groove, avoiding excessive force or sharp tools that could damage the material.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size O-ring for the groove. | Always verify the O-ring's inside diameter, outside diameter, and cross-section against the groove dimensions to ensure a proper fit. |
| Damaging the O-ring during installation with sharp tools. | Utilize appropriate plastic installation tools or lubricate the O-ring and groove to facilitate smooth insertion without causing tears or abrasions. |
| Installing an O-ring with a material incompatible with the fluid or environment. | Confirm that the Buna-N material is suitable for the specific chemicals, temperatures, and pressures of the application. Consult material compatibility charts if necessary. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic cylinders, Fuel and oil handling equipment, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||