This Buna-N industrial O-ring, constructed from Aluminum 6061, offers superior sealing capabilities. Its precise dimensions ensure dependable performance in critical fluid and gas applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.858" |
| Outside Diameter | 4.023" |
| Cross Section | 0.171" |
Precision-manufactured to tight tolerances, this industrial O-ring features an Inside Diameter of 9.858 inches, an Outside Diameter of 4.023 inches, and a Cross Section of 0.171 inches. The Buna-N (Nitrile) material provides excellent resistance to petroleum-based oils, hydraulic fluids, and general chemical exposure, making it ideal for moderate-temperature applications where robust sealing is paramount. The Aluminum 6061 construction offers good strength and corrosion resistance, complementing the sealing properties of the Buna-N. This combination ensures reliable, leak-free performance in a wide range of industrial machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly dimensioned. 2. Carefully stretch the O-ring over the component, avoiding any sharp edges or excessive force. 3. Position the O-ring squarely within the groove to achieve a uniform seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to extrusion or damage. | Apply only sufficient force to seat the O-ring; it should not be compressed beyond its designed limits. |
| Using an O-ring incompatible with the fluid or temperature. | Always verify the material's chemical and temperature resistance against the operating environment. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic cylinders, Automotive sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||