This industrial O-ring, crafted from robust Buna-N, ensures reliable sealing under demanding conditions. Its precise dimensions guarantee a secure fit and prevent leaks in critical fluid and gas systems.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 9.167" |
| Outside Diameter | 9.656" |
| Cross Section | 0.095" |
Built to exacting engineering tolerances, this Buna-N O-ring features an inside diameter of 9.167 inches, an outside diameter of 9.656 inches, and a precise cross-section of 0.095 inches. Buna-N (Nitrile Butadiene Rubber) offers excellent resistance to petroleum-based oils, fuels, and hydraulic fluids, making it ideal for a broad spectrum of industrial sealing applications. Its inherent toughness and resilience provide a durable, long-lasting seal against moderate temperatures and pressures, ensuring system integrity and operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of debris. 2. Carefully position the O-ring within the groove, avoiding excessive stretching or twisting. 3. Apply light lubricant compatible with Buna-N if necessary to facilitate seating and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Stretch the O-ring only enough to clear the retaining lip. Excessive stretching reduces its lifespan and sealing capability. |
| Using a lubricant incompatible with Buna-N. | Always use lubricants specifically recommended for Buna-N to prevent material degradation and premature failure. |
| Installing on a dirty or damaged groove. | Thoroughly clean and inspect the groove for any nicks or burrs before installation to ensure a proper seal. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic systems, Pneumatic cylinders, Fuel and oil lines, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||