Engineered for superior sealing, this industrial O-ring features a robust Buna-N construction with a precise Nylon casing. Its dimensional integrity ensures reliable performance in critical fluid and gas containment systems.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 8.641" |
| Outside Diameter | 1.542" |
| Cross Section | 0.139" |
Specified by design engineers worldwide, this Buna-N industrial O-ring is meticulously manufactured for superior sealing integrity. The compound's inherent resilience and excellent resistance to petroleum-based fluids, oils, and hydraulic fluids make it a preferred choice in demanding environments. The Nylon casing enhances abrasion resistance and provides structural support, ensuring optimal performance under pressure and temperature fluctuations. Key dimensions include an Inside Diameter of 8.641 inches, an Outside Diameter of 1.542 inches, and a Cross Section of 0.139 inches, guaranteeing a precise fit and effective seal in its intended application.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove is clean, dry, and free from debris. 2. Lightly lubricate the O-ring with a compatible lubricant if recommended for the application. 3. Carefully install the O-ring into the groove, avoiding any stretching or twisting that could compromise its seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant that degrades Buna-N. | Consult the material compatibility chart and use only lubricants approved for Buna-N seals. |
| Over-stretching or twisting the O-ring during installation. | Install the O-ring without excessive force, ensuring it sits evenly within the groove. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic equipment, Automotive seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||