This industrial O-ring, crafted from durable Buna-N, ensures exceptional sealing performance. Its precise dimensions and material properties make it ideal for a wide range of industrial applications requiring robust fluid containment.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 8.164" |
| Outside Diameter | 7.697" |
| Cross Section | 0.162" |
Precision-manufactured to tight tolerances, this Buna-N industrial O-ring features an inside diameter of 8.164 inches, an outside diameter of 7.697 inches, and a cross-section of 0.162 inches. Buna-N (Nitrile Butadiene Rubber) offers excellent resistance to petroleum-based oils, fuels, and hydraulic fluids, as well as good abrasion resistance and a broad operating temperature range. These attributes make it a workhorse for static and dynamic sealing applications in various industrial sectors, providing reliable barrier protection against leaks.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and damage. 2. Lightly lubricate the O-ring with a compatible lubricant. 3. Carefully install the O-ring into the designated groove, ensuring it is seated properly without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrect O-ring size selection leading to leakage or premature failure. | Always verify the groove dimensions and select an O-ring with the correct inside diameter, outside diameter, and cross-section for a proper fit. |
| Overtightening fasteners, crushing the O-ring and compromising its sealing ability. | Follow recommended torque specifications for fasteners to ensure adequate compression without over-stressing the O-ring. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Consult material compatibility charts and use only lubricants and cleaning agents approved for Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Actuators, Fluid Power Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||