This industrial O-ring, crafted from robust Buna-N, ensures exceptional sealing performance. Its precise dimensions are ideal for critical applications requiring reliable fluid and gas containment.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.670" |
| Outside Diameter | 9.180" |
| Cross Section | 0.260" |
Precision-manufactured to tight tolerances, this Buna-N O-ring boasts an Inside Diameter of 7.670 inches, an Outside Diameter of 9.180 inches, and a Cross Section of 0.260 inches. Buna-N (Nitrile) is renowned for its excellent resistance to oils, fuels, and many hydraulic fluids, making it a cost-effective choice for general-purpose sealing. Its moderate temperature range (-30°F to +250°F) and good abrasion resistance allow for reliable performance in a wide array of industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Seat the O-ring within its designated groove, verifying proper alignment and compression.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Install with minimal stretching to prevent premature failure and loss of sealing force. |
| Using incompatible lubricants or cleaning agents. | Refer to Buna-N compatibility charts to select appropriate lubricants and cleaning solutions. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic systems, Pneumatic cylinders, Fuel and oil lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||