This industrial O-ring, constructed from durable Buna-N material with an Aluminum 6061 housing, provides exceptional sealing performance. Engineered for precise fit and longevity, it's ideal for demanding fluid power and hydraulic applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 3.533" |
| Outside Diameter | 8.547" |
| Cross Section | 0.156" |
Trusted by engineers across multiple sectors, this Buna-N O-ring features a precise 3.533-inch inside diameter, an 8.547-inch outside diameter, and a 0.156-inch cross-section. The Buna-N material offers excellent resistance to petroleum-based oils, hydraulic fluids, and water, while the Aluminum 6061 housing provides robust structural integrity and corrosion resistance. This combination ensures reliable, leak-free sealing in high-pressure and general-purpose industrial applications, maintaining performance across a wide temperature range.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly dimensioned according to design specifications. 2. Carefully install the O-ring into the groove, avoiding stretching beyond its elastic limit and ensuring it seats uniformly. 3. Apply a compatible lubricant to the O-ring and the mating surface if specified for the application to facilitate assembly and prevent damage during initial operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or stretching the O-ring during installation. | Install the O-ring without over-stretching. If resistance is encountered, verify groove dimensions and consider a lubricant. |
| Installing into a dirty or damaged groove. | Thoroughly clean and inspect the sealing groove for any nicks, burrs, or debris before O-ring installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic Systems, Pneumatic Actuators, Fluid Power Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||