This industrial O-ring, crafted from durable Buna-N, features precise dimensions (5.771" ID, 6.128" OD, 0.177" CS) within a robust carbon steel housing for superior sealing performance.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 5.771" |
| Outside Diameter | 6.128" |
| Cross Section | 0.177" |
Specified by design engineers worldwide, this Buna-N industrial O-ring offers exceptional chemical resistance and a wide operating temperature range, making it ideal for demanding fluid power and general industrial applications. The precise dimensions of 5.771 inches inside diameter, 6.128 inches outside diameter, and a 0.177-inch cross section, integrated into a carbon steel retainer, ensure a secure, leak-free seal against moderate pressures and temperatures. Its nitrile-based polymer composition provides excellent resilience and sealing integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully place the O-ring into its designated groove, avoiding any stretching or twisting. 3. Confirm the O-ring is properly seated and fully contained within the groove before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during assembly, which can pinch or damage the O-ring. | Follow recommended torque specifications for fasteners and ensure even pressure distribution during assembly. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Consult the material compatibility chart for Buna-N and use only approved lubricants and cleaning solutions. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic cylinders, Fluid power manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||