This industrial O-ring, crafted from robust Buna-N (Nitrile), is engineered for exceptional sealing performance. Its precise dimensions ensure a reliable barrier against leaks in critical fluid and gas systems.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 5.176" |
| Outside Diameter | 0.357" |
| Cross Section | 0.094" |
Built to exacting engineering tolerances, this Buna-N (Nitrile) industrial O-ring features an Inside Diameter (ID) of 5.176 inches, an Outside Diameter (OD) of 0.357 inches, and a Cross Section (CS) of 0.094 inches. Buna-N offers excellent resistance to petroleum-based oils, hydraulic fluids, and certain solvents, making it ideal for a wide range of industrial applications. Its inherent resilience and moderate temperature range ensure dependable sealing in dynamic and static environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean and free of debris. 2. Lightly lubricate the O-ring with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Handle the O-ring with care and avoid excessive tension during placement to prevent premature failure. |
| Using incompatible lubricants or cleaning agents. | Always verify lubricant and cleaning agent compatibility with Buna-N material to prevent degradation. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic Systems, Pneumatic Cylinders, Fluid Transfer Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||