This industrial O-ring, crafted from robust Buna-N material with a nylon reinforcement, ensures reliable sealing in demanding applications. Its precise dimensions guarantee a secure fit for critical fluid and gas containment systems.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 4.043" |
| Outside Diameter | 8.216" |
| Cross Section | 0.141" |
Trusted by engineers across multiple sectors, this industrial O-ring boasts a precisely machined Buna-N compound reinforced with nylon for enhanced durability and extrusion resistance. With an Inside Diameter of 4.043 inches, an Outside Diameter of 8.216 inches, and a Cross Section of 0.141 inches, it provides exceptional sealing performance in moderate temperature and pressure environments. The Buna-N material offers excellent resistance to oils, fuels, and hydraulic fluids, making it a superior choice for a wide range of industrial equipment and machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from debris or sharp edges. 2. Lightly lubricate the O-ring with a compatible lubricant to ease installation and prevent damage. 3. Carefully insert the O-ring into the groove, ensuring it sits flush and is not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade the Buna-N material. | Always consult compatibility charts to select a lubricant that is safe for Buna-N. |
| Overtightening fasteners, leading to O-ring compression and premature failure. | Tighten fasteners to the recommended torque specifications to avoid excessive squeeze on the O-ring. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic Systems, Pneumatic Systems, Fuel and Oil Lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||