This industrial O-ring features a durable Buna-N sealing element housed within a corrosion-resistant 316 stainless steel casing. Engineered for reliable performance under extreme conditions, ensuring a leak-proof seal.
| Standard | ISO 9001 |
| Material | 316 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 3.044" |
| Outside Diameter | 8.633" |
| Cross Section | 0.272" |
Trusted by engineers across multiple sectors, this industrial O-ring boasts a precisely machined 316 stainless steel housing for superior chemical and temperature resistance, complementing its Buna-N sealing element. With an Inside Diameter of 3.044 inches, an Outside Diameter of 8.633 inches, and a Cross Section of 0.272 inches, it provides exceptional sealing integrity in hydraulic systems, pneumatic equipment, and fluid power applications where chemical compatibility and mechanical strength are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully position the O-ring within its designated groove. 3. Apply light, even pressure to seat the O-ring, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring deformation or damage. | Apply gentle, consistent pressure to seat the O-ring, ensuring it conforms to the groove without distortion. |
| Installing on a contaminated or rough surface, compromising the seal. | Thoroughly clean and inspect mating surfaces for any imperfections before O-ring installation. |
A: This Industrial O-Ring, Buna-N is manufactured from 316 Stainless Steel.
A: Hydraulic Systems, Pneumatic Equipment, Fluid Power Transmission.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||