Engineered for demanding industrial environments, this Buna-N O-ring features a robust 304 stainless steel construction. Its precise dimensions ensure a secure and reliable seal in critical applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 5.874" |
| Outside Diameter | 10.079" |
| Cross Section | 0.110" |
A proven choice for industrial professionals, this O-ring is manufactured from high-quality Buna-N (Nitrile Rubber) for excellent resistance to oils, fuels, and many common industrial chemicals. The 304 stainless steel housing provides exceptional corrosion resistance and structural integrity, making it suitable for harsh environments. With a precise inside diameter of 5.874 inches, an outside diameter of 10.079 inches, and a cross-section of 0.110 inches, this O-ring is designed for leak-proof performance in static and dynamic sealing applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully position the O-ring into its groove, avoiding any stretching or twisting. 3. Gently compress the O-ring to achieve a snug fit, ensuring even contact with both sealing surfaces.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Stretching or over-compressing the O-ring during installation. | Install the O-ring without excessive stretching. Ensure it fits snugly within its designated groove without deformation. |
| Installing on dirty or damaged mating surfaces. | Thoroughly clean and inspect all mating surfaces for nicks, burrs, or contamination before O-ring installation. |
A: This Industrial O-Ring, Buna-N is manufactured from 304 Stainless Steel.
A: Hydraulic systems, Pneumatic systems, Fluid power applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||