This robust industrial O-ring, constructed from durable Buna-N and featuring a 304 stainless steel housing, offers superior sealing capabilities in challenging operational conditions.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 2.900" |
| Outside Diameter | 2.693" |
| Cross Section | 0.164" |
Engineered for reliability and performance, this industrial O-ring boasts a precise Inside Diameter of 2.900 inches and an Outside Diameter of 2.693 inches, with a substantial Cross Section of 0.164 inches. The Buna-N elastomer provides excellent resistance to oils, fuels, and many hydraulic fluids, while the 304 stainless steel housing ensures superior corrosion resistance and mechanical strength. This combination makes it ideal for high-pressure, moderate-temperature applications where both chemical compatibility and structural integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly dimensioned. 2. Lubricate the O-ring and groove lightly with a compatible lubricant. 3. Carefully install the O-ring into the groove, avoiding any stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the assembly, which can extrude or damage the O-ring. | Follow manufacturer torque specifications and use proper installation tools. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Consult a chemical compatibility chart for Buna-N and select only approved lubricants and cleaners. |
A: This Industrial O-Ring, Buna-N is manufactured from 304 Stainless Steel.
A: Hydraulic Systems, Pneumatic Cylinders, Fluid Power Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||