This industrial-grade Buna-N O-ring provides robust sealing for a wide range of applications. Engineered for durability and chemical resistance, it ensures reliable performance in static and dynamic sealing environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 2.671" |
| Outside Diameter | 2.771" |
| Cross Section | 0.166" |
Trusted by engineers across multiple sectors, this Buna-N O-ring exhibits excellent resistance to petroleum-based oils, fuels, and hydraulic fluids. Its compound offers good physical properties and a wide operating temperature range, making it suitable for general-purpose sealing. The precisely machined dimensions of 2.671" inside diameter, 2.771" outside diameter, and a 0.166" cross-section ensure a secure and leak-free fit in corresponding groove configurations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component, avoiding any sharp edges or excessive twisting. 3. Seat the O-ring fully within the groove, ensuring it is not pinched or twisted during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to cuts or nicks on the O-ring. | Apply a thin layer of compatible lubricant to the O-ring and groove to facilitate smooth installation. Use gentle, even pressure. |
| Installing the O-ring in a twisted or distorted position within the groove. | Ensure the O-ring is laid flat and evenly seated in the groove before final assembly. Visually inspect for any twisting. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic assemblies, Automotive seals, Industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||