This industrial O-ring, crafted from durable Buna-N (Nitrile), offers exceptional sealing performance for critical fluid and gas systems. Its precise dimensions ensure a reliable, leak-proof seal in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 2.327" |
| Outside Diameter | 5.280" |
| Cross Section | 0.103" |
Trusted by engineers across multiple sectors, this Buna-N (Nitrile) industrial O-ring is engineered for superior resilience and chemical resistance. With an Inside Diameter of 2.327 inches, an Outside Diameter of 5.280 inches, and a Cross Section of 0.103 inches, it provides a robust seal against a wide range of fluids and gases. Its nitrile composition offers excellent resistance to petroleum-based oils, fuels, and hydraulic fluids, making it ideal for hydraulic systems, automotive applications, and industrial machinery where media compatibility is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free from debris. 2. Lightly lubricate the O-ring with a compatible lubricant (refer to material compatibility chart). 3. Carefully install the O-ring into the groove, avoiding any twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to extrusion or permanent deformation. | Install with appropriate torque, ensuring a snug but not overstressed fit. Consult system specifications for recommended compression. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Always use lubricants and cleaning agents explicitly rated for Buna-N (Nitrile) to maintain material integrity and sealing performance. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic Systems, Automotive Fuel Systems, Industrial Machinery Seals, Pneumatic Actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||