This industrial O-ring, constructed from durable Buna-N (Nitrile Rubber), ensures exceptional sealing performance in a wide range of applications. Its precise dimensions provide a reliable barrier against leaks in dynamic and static environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.287" |
| Outside Diameter | 5.989" |
| Cross Section | 0.075" |
Manufactured under strict quality controls, this Buna-N (Nitrile Rubber) O-ring boasts an Inside Diameter of 1.287 inches, an Outside Diameter of 5.989 inches, and a Cross Section of 0.075 inches. Buna-N offers excellent resistance to petroleum-based oils, hydraulic fluids, water, and some solvents, making it ideal for general-purpose sealing. Its robust nature provides a reliable seal against pressure and contamination in moderate temperature ranges. The material's inherent elasticity allows for effective compression and recovery, crucial for maintaining seal integrity over time.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the shaft or into the groove, avoiding sharp tools. 3. Apply a light lubricant compatible with Buna-N if necessary to ease installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to nicks or tears. | Employ a lubricant compatible with the O-ring material and use a smooth, even stretching motion. |
| Installing an O-ring that is not the correct size for the groove or shaft. | Always verify O-ring dimensions against the application's specifications to ensure a proper fit and seal. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic cylinders, Automotive seals, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||