This industrial O-ring, constructed from robust Buna-N and featuring a 304 Stainless Steel housing, provides exceptional sealing in demanding industrial applications. Its precise dimensions ensure a secure and leak-proof fit.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 1.176" |
| Outside Diameter | 8.032" |
| Cross Section | 0.218" |
Engineered for reliability and performance, this industrial O-ring boasts a nominal inside diameter of 1.176 inches, an outside diameter of 8.032 inches, and a cross-section of 0.218 inches. The Buna-N elastomer offers excellent resistance to oils, fuels, and many solvents, making it suitable for a wide range of fluid power systems, automotive, and general industrial sealing needs. The 304 stainless steel outer ring provides structural integrity and enhanced corrosion resistance, ensuring consistent performance in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from burrs or debris. 2. Carefully position the O-ring within its designated groove, avoiding any stretching or twisting. 3. Apply a light, compatible lubricant if necessary to facilitate seating and prevent damage during installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during assembly, leading to O-ring extrusion or damage. | Follow specified torque values for fasteners and ensure proper groove fill. |
| Using incompatible cleaning agents that degrade the Buna-N material. | Consult material compatibility charts and use only recommended cleaning solutions. |
A: This Industrial O-Ring, Buna-N is manufactured from 304 Stainless Steel.
A: Hydraulic and Pneumatic Systems, Automotive Seals, General Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||