This industrial O-ring, constructed from robust Aluminum 6061, provides exceptional sealing performance. Its Buna-N material ensures excellent resistance to oils and fuels, making it ideal for critical applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 1.137" |
| Outside Diameter | 1.108" |
| Cross Section | 0.246" |
Precision-manufactured to tight tolerances, this Buna-N O-ring features an Inside Diameter of 1.137 inches, an Outside Diameter of 1.108 inches, and a Cross Section of 0.246 inches. The Aluminum 6061 material offers a balance of strength, corrosion resistance, and light weight, suitable for moderate temperature and pressure sealing applications. Its chemical inertness and durability make it a reliable choice for hydraulic and pneumatic systems, automotive components, and general industrial fluid sealing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and undamaged. 2. Carefully stretch the O-ring over the component, avoiding any sharp edges or tools that could nick or cut the material. 3. Gently seat the O-ring into its designated groove, ensuring it is fully contained and not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size O-ring for the groove. | Always verify the O-ring dimensions (ID, OD, and Cross Section) against the groove specifications for a proper fit. |
| Stretching the O-ring excessively during installation. | Apply only enough stretch to slip the O-ring over the component. Overstretching can lead to premature failure and reduced sealing effectiveness. |
| Allowing the O-ring to come into contact with sharp edges during installation. | Use appropriate tools and techniques to protect the O-ring from nicks, cuts, or abrasion during the installation process. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic and Pneumatic Systems, Automotive Fluid Systems, General Industrial Sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||