This industrial O-ring, constructed from robust Buna-N (Nitrile), provides exceptional sealing performance. Engineered for precision, it ensures leak-proof operation in a wide array of industrial applications requiring reliable fluid containment.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.660" |
| Outside Diameter | 9.245" |
| Cross Section | 0.243" |
Built to exacting engineering tolerances, this Buna-N O-ring features an Inside Diameter of 0.660 inches, an Outside Diameter of 9.245 inches, and a Cross Section of 0.243 inches. Buna-N offers excellent resistance to petroleum-based oils, hydraulic fluids, water, and fuels, making it suitable for moderate temperature applications up to 212°F (100°C). Its resilience and good abrasion resistance ensure long-term sealing integrity in dynamic and static applications where chemical compatibility is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly dimensioned. 2. Lightly lubricate the O-ring and groove with a compatible lubricant (e.g., silicone grease for general use, specific fluid for the application). 3. Carefully install the O-ring into the groove, avoiding stretching or twisting, to ensure a uniform fit and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Install the O-ring without excessive tension. The correct groove dimensions should accommodate the O-ring's size without requiring significant elongation. |
| Using an incompatible lubricant. | Always verify lubricant compatibility with the O-ring material (Buna-N) and the media being sealed. Incorrect lubricants can degrade the O-ring. |
| Installing into a dirty or damaged groove. | Thoroughly clean and inspect the groove for any nicks, burrs, or foreign particles that could compromise the seal or damage the O-ring. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic systems, Pneumatic cylinders, Fluid power equipment, Automotive fuel systems, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||