This industrial O-ring, crafted from robust Buna-N and housed within a 304 Stainless Steel retainer, offers exceptional sealing integrity. Designed for reliability in challenging operational conditions, ensuring leak-free performance.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.852" |
| Outside Diameter | 7.501" |
| Cross Section | 0.104" |
Trusted by engineers across multiple sectors, this Buna-N O-ring, specified with an Inside Diameter of 6.852", Outside Diameter of 7.501", and a Cross Section of 0.104", is engineered for critical sealing applications. The Buna-N material provides excellent resistance to oils, fuels, and many hydraulic fluids, while the 304 stainless steel construction offers superior corrosion resistance and mechanical strength, making it suitable for extreme temperature variations and aggressive chemical environments where standard O-rings would fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully place the O-ring into the designated groove, ensuring it is not twisted. 3. Apply light lubrication with a compatible fluid if necessary to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the assembly, which can compress the O-ring beyond its elastic limit, leading to permanent deformation and seal failure. | Adhere to specified torque values for fasteners. Consult assembly drawings for correct tightening sequences and pressures. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material or corrode the stainless steel. | Always verify lubricant and cleaning agent compatibility with both Buna-N and 304 stainless steel before application. |
A: This Industrial O-Ring, Buna-N is manufactured from 304 Stainless Steel.
A: Hydraulic and Pneumatic Systems, Automotive and Aerospace Components, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||