This industrial O-ring features a durable Viton elastomer for superior chemical and heat resistance, with a nylon reinforcement for enhanced structural integrity and extrusion resistance in demanding environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.099" |
| Outside Diameter | 4.287" |
| Cross Section | 0.199" |
Manufactured under strict quality controls, this industrial O-ring boasts an Inside Diameter of 7.099 inches, an Outside Diameter of 4.287 inches, and a Cross Section of 0.199 inches. The Viton material offers exceptional resistance to a wide range of chemicals, oils, fuels, and high temperatures (up to 400°F / 204°C), while the integrated nylon reinforcement significantly increases its tensile strength and abrasion resistance, making it ideal for high-pressure and dynamic sealing applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free of debris. 2. Carefully stretch the O-ring over the male component or into the groove, avoiding any sharp edges. 3. Verify proper seating and compression for a leak-free seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fittings, causing excessive compression and premature failure. | Tighten fittings to the manufacturer's recommended torque specifications. |
| Using incompatible lubricants or cleaning agents that degrade the Viton elastomer. | Consult the Viton chemical compatibility chart and use only approved lubricants and cleaning agents. |
A: This Industrial O-Ring, Viton is manufactured from Nylon.
A: Hydraulic and pneumatic systems, Chemical processing equipment, Automotive fuel systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||