Engineered for extreme environments, this robust Carbon Steel O-ring ensures superior sealing performance. Its precise dimensions provide a secure fit, preventing leaks in critical industrial systems.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 1.234" |
| Outside Diameter | 8.722" |
| Cross Section | 0.198" |
Purpose-built for heavy-duty applications, this Carbon Steel O-ring is designed to withstand extreme pressures and temperatures. With an Inside Diameter of 1.234 inches, an Outside Diameter of 8.722 inches, and a Cross Section of 0.198 inches, it offers a precise and reliable seal. The inherent strength and corrosion resistance of carbon steel make it ideal for use in hydraulic systems, pneumatic actuators, and various fluid power applications where component integrity is paramount. Its material composition ensures long-term durability and resistance to mechanical wear.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sealing groove and mating surfaces thoroughly to remove any debris, oil, or old sealant. 2. Carefully place the O-ring into the groove, ensuring it is seated evenly and not twisted. 3. Apply a light, compatible lubricant to the O-ring and the mating surface if recommended for the specific application to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong O-ring size for the groove. | Always verify O-ring dimensions (ID, OD, CS) against the groove specifications to ensure proper compression and sealing. |
| Overtightening fasteners, leading to O-ring extrusion. | Follow recommended torque specifications for all fasteners to avoid excessive squeeze and potential O-ring damage. |
| Installing a twisted or kinked O-ring. | Ensure the O-ring is laid flat and unkinked in the groove during installation to prevent immediate failure. |
A: This Industrial O-Ring, Silicone is manufactured from Carbon Steel.
A: Hydraulic cylinders and pumps, Pneumatic systems and valves, Fluid power manifolds and couplings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||