This industrial O-ring, constructed from Buna-N and housed within a durable carbon steel casing, offers exceptional sealing performance. Engineered for reliability, it ensures leak-free operation in critical applications.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 7.434" |
| Outside Diameter | 9.754" |
| Cross Section | 0.218" |
Precision-manufactured to tight tolerances, this Buna-N O-ring features an inside diameter of 7.434 inches, an outside diameter of 9.754 inches, and a cross-section of 0.218 inches. The Buna-N material provides excellent resistance to oils, fuels, and hydraulic fluids, making it suitable for a wide range of industrial applications. The carbon steel housing enhances structural integrity and provides a robust barrier against external damage and pressure, ensuring long-term sealing efficacy in harsh operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Carefully install the O-ring into the groove, avoiding stretching or twisting. 3. Verify proper seating and compression before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation, leading to premature failure. | Install the O-ring without excessive stretching, allowing it to seat naturally within the groove. |
| Installing the O-ring into a dirty or damaged groove, compromising the seal. | Thoroughly inspect and clean the mating groove for any imperfections or contaminants before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic systems, Fuel and oil lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||