This industrial O-ring, fabricated from durable Buna-N, offers exceptional sealing performance in challenging conditions. Its precise dimensions ensure a reliable fit and long service life in critical applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 8.804" |
| Outside Diameter | 10.194" |
| Cross Section | 0.134" |
Designed for demanding industrial environments, this Buna-N O-ring exhibits excellent resistance to petroleum-based oils, fuels, and hydraulic fluids. The material's inherent robustness makes it suitable for a wide temperature range, typically -40°F to 212°F (-40°C to 100°C). With an Inside Diameter of 8.804 inches, an Outside Diameter of 10.194 inches, and a Cross Section of 0.134 inches, it is engineered for precise fitting within mating grooves to provide a leak-proof seal. Its resilience and chemical inertness contribute to extended operational life and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of any debris or burrs. 2. Lightly lubricate the O-ring and groove with a compatible lubricant to ease installation and prevent damage. 3. Carefully install the O-ring into the groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible lubricants that can degrade the Buna-N material. | Consult the lubricant compatibility chart for Buna-N to select an appropriate lubricant. |
| Forcing the O-ring into the groove, leading to cuts or nicks. | Apply gentle pressure and ensure the O-ring is properly aligned before installation. |
| Installing the O-ring in a contaminated groove. | Thoroughly clean the groove before proceeding with installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic systems, Pneumatic equipment, Fuel handling systems, Automotive seals, Industrial pumps and valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||