This industrial O-ring, manufactured from Buna-N with an Aluminum 6061 core, offers robust sealing capabilities. Precisely machined to 7.941" ID, 5.958" OD, and 0.106" CS, it ensures leak-free performance in challenging environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 7.941" |
| Outside Diameter | 5.958" |
| Cross Section | 0.106" |
A proven choice for industrial professionals, this Buna-N O-ring with an Aluminum 6061 core provides exceptional resilience and chemical resistance for a wide range of sealing applications. The precisely machined dimensions of 7.941" inside diameter, 5.958" outside diameter, and 0.106" cross-section ensure a tight and reliable seal against fluids and gases. Aluminum 6061's strength and corrosion resistance complement the Buna-N's excellent abrasion and oil resistance, making this O-ring suitable for hydraulic systems, pneumatic assemblies, and general industrial machinery where durability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Carefully install the O-ring into its designated groove, avoiding any twisting or stretching. 3. Apply a light coat of compatible lubricant if recommended for the specific application to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size O-ring for the groove. | Always verify the O-ring dimensions (ID, OD, CS) against the groove dimensions to ensure a proper fit. |
| Over-stretching or twisting the O-ring during installation. | Gently place the O-ring into the groove, allowing it to seat naturally without undue force. |
| Installing on a contaminated or damaged groove surface. | Thoroughly clean and inspect the groove for any burrs, nicks, or debris before installing the O-ring. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic Systems, Pneumatic Assemblies, General Industrial Machinery, Fluid Power Applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||