This robust Buna-N industrial O-ring provides reliable sealing in challenging operational settings. Engineered for durability and resistance, it ensures leak-free performance in critical applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.383" |
| Outside Diameter | 0.303" |
| Cross Section | 0.205" |
Designed for demanding industrial environments, this O-ring features a precise Inside Diameter of 6.383 inches, an Outside Diameter of 0.303 inches, and a Cross Section of 0.205 inches. Constructed from high-quality Buna-N (Nitrile Butadiene Rubber), it exhibits exceptional resistance to oils, fuels, greases, and many hydraulic fluids. This material's resilience makes it ideal for static and dynamic sealing applications where moderate temperatures and aggressive media are present, ensuring long-term sealing integrity and operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from burrs or contaminants. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools. 3. Seat the O-ring evenly within the groove, confirming it is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to cuts or tears. | Gently stretch the O-ring and use a rounded tool if necessary to ease it into the groove. |
| Installing on a dirty or damaged surface, compromising the seal. | Thoroughly clean and inspect the sealing groove and mating surfaces before installation. |
| Over-stretching the O-ring, causing premature failure. | Select the correct O-ring size for the groove and apply only the necessary stretch to fit. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic equipment, Fuel and oil systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||