This industrial O-ring, fabricated from durable Buna-N and precision-engineered with an Aluminum 6061 core, offers exceptional sealing performance. Its robust construction ensures reliability in a wide range of industrial applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 0.174" |
| Outside Diameter | 5.200" |
| Cross Section | 0.126" |
Manufactured under strict quality controls, this industrial O-ring features an inside diameter of 0.174 inches, an outside diameter of 5.200 inches, and a cross-section of 0.126 inches. The Buna-N elastomer provides excellent resistance to oils, fuels, and many hydraulic fluids, while the Aluminum 6061 core enhances its rigidity and dimensional stability. This combination makes it ideal for static sealing applications where chemical compatibility and a reliable seal are paramount. Operating temperature range is typically -35°F to +250°F (-37°C to +121°C).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free from burrs or sharp edges. 2. Carefully place the O-ring into the groove, avoiding stretching or twisting. 3. Apply a light coating of compatible lubricant if recommended for the specific application to facilitate installation and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during assembly, leading to compression set and premature failure. | Ensure proper torque specifications are followed for gland hardware to avoid excessive compression of the O-ring. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Consult the material compatibility chart for Buna-N and select lubricants and cleaning agents approved for this elastomer. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic equipment, Automotive seals, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||