This industrial O-ring, constructed with a robust Buna-N sealing element and a 304 stainless steel housing, delivers exceptional performance in challenging environments requiring reliable fluid containment and pressure resistance.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 9.096" |
| Outside Diameter | 10.320" |
| Cross Section | 0.270" |
Built to exacting engineering tolerances, this industrial O-ring features an inside diameter of 9.096 inches, an outside diameter of 10.320 inches, and a cross-section of 0.270 inches. The Buna-N elastomer offers excellent resistance to oils, fuels, and many hydraulic fluids, while the 304 stainless steel housing provides superior corrosion resistance and structural integrity, making it ideal for chemical processing, automotive, and heavy machinery applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free from debris. 2. Carefully lubricate the O-ring and groove with a compatible lubricant. 3. Gently install the O-ring into the groove, avoiding any stretching or twisting, ensuring a snug fit without deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Always lubricate the O-ring and groove, and install with minimal stretching to prevent premature failure and seal degradation. |
| Using incompatible lubricants or cleaning agents. | Verify lubricant and cleaning agent compatibility with Buna-N and 304 stainless steel to avoid material degradation and loss of sealing capability. |
A: This Industrial O-Ring, Buna-N is manufactured from 304 Stainless Steel.
A: Hydraulic Systems, Automotive Sealing, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||