This robust industrial O-ring, constructed from resilient Buna-N material, provides exceptional sealing performance in high-pressure environments. Engineered for reliability, it offers a precise fit and long service life.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 5.768" |
| Outside Diameter | 3.895" |
| Cross Section | 0.140" |
A high-performance industrial component, this Buna-N O-ring is precisely manufactured to meet stringent sealing requirements. Featuring an Inside Diameter of 5.768 inches, an Outside Diameter of 3.895 inches, and a Cross Section of 0.140 inches, it exhibits excellent resistance to oils, fuels, and hydraulic fluids. The inherent properties of Buna-N ensure effective sealing across a broad temperature range, making it suitable for critical applications where fluid containment and pressure integrity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the larger diameter or thread it through the groove, avoiding any sharp edges or tools that could cause damage. 3. Gently press the O-ring into the groove, ensuring it sits evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtretching or pinching the O-ring during installation. | Use appropriate tools and techniques to avoid excess strain. Ensure the O-ring is seated correctly in its groove without deformation. |
| Installing into a dirty or damaged groove. | Thoroughly clean and inspect the sealing groove for nicks, burrs, or corrosion before installation. A clean groove is essential for a proper seal. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic cylinder seals, Pneumatic actuators, Fuel system components, Oil and gas exploration equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||