This industrial O-ring, crafted from durable Buna-N with Nylon reinforcement, ensures reliable sealing in demanding environments. Its precise dimensions guarantee a tight fit for critical applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 6.879" |
| Outside Diameter | 1.026" |
| Cross Section | 0.186" |
Specified by design engineers worldwide, this Buna-N O-ring features a Nylon reinforcement for enhanced structural integrity and improved resistance to extrusion. The compound offers excellent resistance to petroleum oils, greases, and hydraulic fluids, making it ideal for automotive, industrial machinery, and fluid power systems. With an Inside Diameter of 6.879 inches, an Outside Diameter of 1.026 inches, and a Cross Section of 0.186 inches, it provides robust sealing under moderate pressures and temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the component or into the groove, avoiding excessive force or sharp tools. 3. Verify the O-ring is seated properly and evenly within the groove without twists or kinks.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a sharp tool to force the O-ring into place, causing cuts or tears. | Gently stretch and maneuver the O-ring, using a non-marring tool if necessary for tight fits. |
| Installing a twisted or kinked O-ring, leading to immediate leakage. | Ensure the O-ring lies flat and evenly within the groove, free of any distortions. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic and pneumatic systems, Automotive fuel and oil systems, General industrial fluid handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||