This industrial O-ring, constructed from Buna-N with a carbon steel housing, provides reliable sealing for demanding applications. Its precise dimensions ensure a secure fit and long-lasting performance in critical systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.446" |
| Outside Diameter | 8.759" |
| Cross Section | 0.176" |
A proven choice for industrial professionals, this Buna-N O-ring features a carbon steel construction for enhanced durability and resistance to extrusion. With an inside diameter of 7.446 inches, an outside diameter of 8.759 inches, and a cross-section of 0.176 inches, it is engineered for precise sealing in moderate pressure and temperature environments. Its excellent resistance to oils, fuels, and hydraulic fluids makes it ideal for a wide range of industrial hydraulic and pneumatic systems, ensuring leak-free operation and operational efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully install the O-ring into the groove, avoiding any stretching or twisting. 3. Verify proper seating and alignment before assembling the mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently guide the O-ring into the groove to prevent deformation and premature failure. |
| Installing in a contaminated groove. | Thoroughly clean the sealing groove and surrounding surfaces before O-ring installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic Systems, Pneumatic Actuators, Fluid Power Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||