Engineered for superior performance, this industrial Buna-N O-ring offers exceptional sealing in demanding applications. Its robust construction provides reliable fluid and gas containment across a wide range of temperatures and pressures.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 5.135" |
| Outside Diameter | 2.170" |
| Cross Section | 0.226" |
Specified by design engineers worldwide, this industrial O-ring features a 5.135-inch inside diameter, a 2.170-inch outside diameter, and a 0.226-inch cross-section. Constructed from high-quality Buna-N (Nitrile Butadiene Rubber) with nylon reinforcement, it exhibits excellent resistance to oils, fuels, hydraulic fluids, and general chemicals. This material composition ensures durability and long service life in rigorous industrial environments, maintaining its sealing integrity under moderate pressure and temperature fluctuations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the component to be sealed, avoiding excessive force or sharp edges. 3. Gently seat the O-ring into its designated groove, ensuring it is uniformly positioned without twists or kinks.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or stretching the O-ring during installation. | Install the O-ring with minimal stretching, ensuring it seats properly without deformation. |
| Using an O-ring not rated for the specific fluid or operating temperature. | Verify the Buna-N material's chemical and temperature compatibility with the application's service conditions. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic systems, Pneumatic cylinders, Automotive fuel systems, General industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||