This industrial O-ring, crafted from robust Aluminum 6061, offers superior sealing performance. Engineered for precision, it ensures reliable operation in diverse applications requiring chemical resistance and moderate temperature tolerance.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 1.398" |
| Outside Diameter | 9.006" |
| Cross Section | 0.132" |
Precision-manufactured to tight tolerances, this Buna-N O-ring boasts an Inside Diameter of 1.398", an Outside Diameter of 9.006", and a Cross Section of 0.132". The Aluminum 6061 material provides excellent resistance to petroleum-based fluids, hydraulic fluids, and water, while offering good mechanical strength and moderate temperature capabilities. Its chemical inertness and durability make it suitable for dynamic and static sealing applications in hydraulic systems, pneumatic equipment, and general industrial machinery where reliable leak prevention is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from any debris or damage. 2. Carefully inspect the O-ring for any nicks, cuts, or imperfections before installation. 3. Gently stretch or compress the O-ring as needed to fit into the groove, avoiding sharp tools that could puncture the seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Employ gentle manipulation and appropriate tools, such as rounded installation picks, to prevent punctures or stretching of the O-ring. |
| Installing on a dirty or damaged groove surface. | Thoroughly clean and inspect the groove for any burrs, sharp edges, or debris that could compromise the seal's integrity. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic cylinder seals, Pneumatic actuator seals, General industrial fluid sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||