This robust industrial O-ring, manufactured from durable Buna-N (Nitrile), is engineered for reliable sealing in critical applications. Its precise dimensions ensure a superior fit and dependable performance under demanding conditions.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 4.170" |
| Outside Diameter | 10.580" |
| Cross Section | 0.164" |
Specified by design engineers worldwide, this industrial O-ring boasts an Inside Diameter of 4.170 inches and an Outside Diameter of 10.580 inches, with a precise Cross Section of 0.164 inches. Constructed from premium Buna-N (Nitrile rubber), it offers exceptional resistance to petroleum-based oils, fuels, and hydraulic fluids, making it ideal for environments where chemical compatibility and robust sealing are paramount. This material also exhibits good abrasion resistance and a broad operating temperature range.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component, avoiding excessive force or twisting. 3. Gently seat the O-ring into the groove, ensuring it is uniformly positioned without pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, causing material degradation. | Always use a lubricant compatible with Buna-N and the application's fluid environment. |
| Over-stretching or twisting the O-ring during installation. | Handle the O-ring with care, using appropriate tools if necessary, to prevent damage. |
A: This Industrial O-Ring, Buna-N is manufactured from Polycarbonate.
A: Hydraulic systems, Pneumatic cylinders, Fuel and oil handling equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||