This industrial O-ring, crafted from robust Buna-N and featuring an Aluminum 6061 housing, provides superior sealing in critical industrial environments. Engineered for reliability and chemical resistance.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 3.521" |
| Outside Diameter | 5.823" |
| Cross Section | 0.233" |
Built to exacting engineering tolerances, this Buna-N O-ring boasts a precise Inside Diameter of 3.521 inches and an Outside Diameter of 5.823 inches, with a critical Cross Section measuring 0.233 inches. The integrated Aluminum 6061 housing offers excellent structural integrity and corrosion resistance, making it ideal for applications requiring a rigid seal against moderate pressures and temperatures. Buna-N (Nitrile Butadiene Rubber) is chosen for its broad resistance to oils, fuels, and hydraulic fluids, ensuring long-term performance in challenging industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from burrs or debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force or sharp tools that could nick or cut the sealing element. 3. Position the O-ring squarely within its designated groove, ensuring it is seated without twisting or pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using damaged or contaminated mating surfaces. | Thoroughly clean and inspect all groove surfaces before installation to prevent leaks and premature O-ring failure. |
| Over-stretching or twisting the O-ring during installation. | Install the O-ring with deliberate care, using appropriate tools if necessary, and ensure it lies flat and uncompressed in the groove. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic cylinders, Fluid power equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||