Engineered for critical sealing, this Buna-N O-ring boasts superior chemical resistance and durability. Its precise dimensions ensure a secure fit in demanding industrial environments.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 1.585" |
| Outside Diameter | 1.561" |
| Cross Section | 0.139" |
A high-performance industrial component, this Buna-N O-ring features an inside diameter of 1.585 inches, an outside diameter of 1.561 inches, and a cross-section of 0.139 inches. Constructed from Aluminum 6061, known for its excellent strength-to-weight ratio and corrosion resistance, this seal is optimized for applications requiring reliable fluid and gas containment. Its robust material composition makes it suitable for moderate temperature ranges and exposure to oils, fuels, and many hydraulic fluids, ensuring long-term operational integrity in machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove any debris or residue. 2. Carefully inspect the O-ring for any damage before installation. 3. Gently place the O-ring into its designated groove, ensuring it is seated evenly without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the O-ring into the groove. | Ensure the O-ring size is correct for the groove and application; apply a thin layer of compatible lubricant if necessary to ease insertion. |
| Using a damaged or worn O-ring. | Always inspect O-rings for nicks, cuts, or signs of degradation before installation to prevent leaks. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic systems, Pneumatic assemblies, Fluid transfer lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||