Engineered for exceptional performance, this industrial Buna-N O-ring features a robust 316 stainless steel construction for superior corrosion resistance. Its precise dimensions ensure a reliable seal in critical applications.
| Standard | ASME B18 |
| Material | 316 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 6.090" |
| Outside Diameter | 5.268" |
| Cross Section | 0.181" |
Trusted by engineers across multiple sectors, this Buna-N O-ring is manufactured from high-grade 316 stainless steel, offering exceptional resistance to a wide range of chemicals, oils, and high temperatures. With an inside diameter of 6.090 inches, an outside diameter of 5.268 inches, and a cross-section of 0.181 inches, it is designed for precise fitting and reliable sealing in demanding industrial fluid power and machinery applications. The 316 stainless steel housing provides enhanced durability and longevity, making it suitable for harsh operating conditions where standard materials would degrade.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean and free of debris. 2. Carefully position the O-ring within the groove, avoiding excessive stretching. 3. Ensure even compression across the O-ring during assembly to achieve a proper seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 16.0 - 18.0% |
| Nickel (Ni) | 10.0 - 14.0% |
| Molybdenum (Mo) | 2.0 - 3.0% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Excellent |
| Chemical / Acidic | Good |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening or overstretching the O-ring during installation. | Install the O-ring with minimal stretch, only enough to fit into the groove. Avoid excessive force that could cause permanent deformation or damage. |
| Installing the O-ring into a contaminated or damaged groove. | Thoroughly clean and inspect the mating groove for any burrs, sharp edges, or debris before installation to prevent premature failure. |
A: This Industrial O-Ring, Buna-N is manufactured from 316 Stainless Steel.
A: Hydraulic Systems, Pneumatic Actuators, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||