This industrial O-ring, crafted from durable Buna-N and encased in a robust carbon steel housing, provides exceptional sealing performance in demanding industrial environments. Engineered for longevity and reliability.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 6.602" |
| Outside Diameter | 9.323" |
| Cross Section | 0.256" |
Purpose-built for heavy-duty applications, this industrial O-ring boasts an Inside Diameter of 6.602 inches, an Outside Diameter of 9.323 inches, and a Cross Section of 0.256 inches. The Buna-N (Nitrile) elastomer offers excellent resistance to oils, fuels, hydraulic fluids, and general chemicals, making it suitable for a wide range of operational conditions. The carbon steel housing enhances structural integrity and provides additional protection against extrusion and mechanical damage, crucial for high-pressure and abrasive environments. This combination ensures superior sealing in hydraulic systems, pneumatic assemblies, automotive components, and general machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the smaller diameter of the component, avoiding sharp edges or excessive force. 3. Gently seat the O-ring into the groove, ensuring it is flush and evenly distributed without twisting or pinching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| O-ring twisting or becoming pinched during installation. | Ensure proper lubrication and use a suitable installation tool to guide the O-ring into the groove without distortion. |
| Installing into a dirty or damaged groove. | Thoroughly clean and inspect the mating groove for any imperfections that could compromise the seal. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic Cylinders, Pneumatic Actuators, Pump Assemblies, Gearboxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||