This industrial O-ring, crafted from robust Buna-N and precisely sized, provides exceptional sealing in demanding environments. Its 6061 aluminum construction ensures durability and resistance.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 4.517" |
| Outside Diameter | 8.367" |
| Cross Section | 0.165" |
Manufactured under strict quality controls, this Buna-N O-ring features an inside diameter of 4.517 inches, an outside diameter of 8.367 inches, and a cross-section of 0.165 inches. The 6061 aluminum material offers superior strength and corrosion resistance, making it ideal for applications requiring a rigid, well-defined seal. Buna-N (Nitrile) provides excellent resistance to oils, fuels, and many hydraulic fluids, operating effectively within a temperature range of -40°F to 257°F (-40°C to 125°C).
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean and free of debris. 2. Carefully install the O-ring into the groove, avoiding any twisting or stretching beyond its elastic limit. 3. Verify proper seating and compression of the O-ring within the groove for optimal sealing performance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation, leading to premature failure. | Gently maneuver the O-ring into the groove, using a lubricant if necessary, to prevent excessive elongation. |
| Using the O-ring in an incompatible chemical or temperature environment. | Always verify the material's chemical and temperature resistance ratings against the application's specific conditions. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Automotive fuel systems, Hydraulic and pneumatic cylinders, General industrial machinery sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||