Engineered for robust sealing in challenging industrial settings, this Buna-N O-ring features a precise Aluminum 6061 construction. Its dimensions ensure a secure, leak-proof fit in critical applications.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 6.372" |
| Outside Diameter | 10.427" |
| Cross Section | 0.274" |
Designed for demanding industrial environments, this Buna-N O-ring is manufactured from high-grade Aluminum 6061, offering exceptional resistance to abrasion and moderate chemical exposure. With an Inside Diameter of 6.372 inches, an Outside Diameter of 10.427 inches, and a precise Cross Section of 0.274 inches, it provides a superior sealing solution for hydraulic systems, pneumatic equipment, and general fluid containment where temperature extremes and mechanical stress are prevalent.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free from debris. 2. Carefully position the O-ring into its designated groove, avoiding stretching or twisting. 3. Apply a thin layer of compatible lubricant if recommended for the specific application and fluid.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the sealing assembly, which can lead to O-ring compression set and premature failure. | Follow torque specifications for the assembly. A slight compression is ideal; excessive force deforms the O-ring. |
| Using incompatible lubricants or cleaning agents that degrade the Buna-N material. | Consult the material compatibility chart for Buna-N to select appropriate lubricants and cleaning agents. Avoid petroleum-based products unless specifically rated for Buna-N. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic cylinder sealing, Pneumatic actuator sealing, Fluid power systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||