This industrial-grade O-ring, constructed from robust Buna-N, ensures reliable sealing in high-pressure and demanding environments. Its precise dimensions and material composition make it ideal for a wide range of fluid power and mechanical systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.880" |
| Outside Diameter | 1.050" |
| Cross Section | 0.194" |
Precision-manufactured to tight tolerances, this Buna-N O-ring offers superior performance and longevity. With an inside diameter of 8.880 inches, an outside diameter of 1.050 inches, and a cross-section of 0.194 inches, it provides a secure and leak-proof seal. Buna-N (Nitrile Butadiene Rubber) exhibits excellent resistance to oils, fuels, and many hydraulic fluids, making it suitable for applications within a moderate temperature range. Its inherent resilience and compression set resistance ensure sustained sealing effectiveness over time, crucial for maintaining system integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the groove and mating surfaces for cleanliness and absence of damage. 2. Lightly lubricate the O-ring with a compatible lubricant to prevent tearing during installation. 3. Carefully place the O-ring into the designated groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply a compatible lubricant and gently guide the O-ring into the groove. |
| Installing on a dirty or damaged groove, compromising the seal. | Thoroughly clean and inspect the groove before O-ring placement. |
| Over-stretching or twisting the O-ring during installation. | Ensure the O-ring is installed in its natural state, without distortion. |
A: This Industrial O-Ring, Buna-N is manufactured from Brass.
A: Hydraulic systems, Pneumatic cylinders, Fluid power equipment, Automotive sealing, Industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||