This industrial O-ring, crafted from robust Buna-N (Nitrile Rubber), offers exceptional sealing performance. Its precise dimensions and resilient material make it ideal for a wide range of demanding industrial applications requiring reliable fluid and gas containment.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 2.094" |
| Outside Diameter | 0.834" |
| Cross Section | 0.116" |
A proven choice for industrial professionals, this Buna-N O-ring features an inside diameter of 2.094 inches, an outside diameter of 0.834 inches, and a cross-section of 0.116 inches. Buna-N (Nitrile Butadiene Rubber) is renowned for its excellent resistance to oils, fuels, and many hydraulic fluids, as well as good abrasion and tear resistance. This makes it a superior material for static and dynamic sealing applications where exposure to hydrocarbons is prevalent. The carbon steel specification, while unusual for a standard O-ring material, suggests a potential custom application or a protective outer component not detailed here; typically, O-rings are elastomer-based without a metal substrate for their primary sealing function. For standard O-ring applications, the Buna-N material itself provides the sealing integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, free of debris, and properly lubricated with a compatible lubricant. 2. Carefully stretch the O-ring over the component and gently guide it into the groove, avoiding any sharp edges or excessive force. 3. Verify the O-ring is seated evenly and without twists or damage before assembling the mating part.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Installing on a dirty or damaged groove. | Thoroughly clean and inspect the groove for any imperfections that could cause premature failure. |
| Using excessive force or sharp tools during installation. | Handle the O-ring with care and use appropriate lubrication to ease installation, preventing nicks or tears. |
| Over-stretching or twisting the O-ring during placement. | Gently stretch only as much as necessary to fit and ensure it sits flat and untwisted in the groove. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic systems, Pneumatic cylinders, Fluid power equipment, Fuel and oil handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||