This industrial O-ring, crafted from resilient Buna-N, ensures superior sealing performance. Precisely machined from Aluminum 6061, it offers exceptional durability for critical applications.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 4.346" |
| Outside Diameter | 8.912" |
| Cross Section | 0.103" |
Built to exacting engineering tolerances, this Buna-N O-ring boasts an Inside Diameter of 4.346 inches, an Outside Diameter of 8.912 inches, and a cross-section of 0.103 inches. The core Buna-N material provides excellent resistance to oils, fuels, and hydraulic fluids, making it ideal for dynamic and static sealing applications within a moderate temperature range. The Aluminum 6061 construction offers inherent corrosion resistance and good machinability, ensuring a precise fit and reliable seal integrity in a variety of industrial fluid power systems, automotive components, and general machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free of burrs or foreign debris. 2. Carefully lubricate the O-ring and groove with a compatible lubricant to prevent damage during installation. 3. Gently install the O-ring into the groove, avoiding stretching or twisting, and confirm it sits flush within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Use a compatible lubricant and ensure the O-ring is installed without undue tension or twisting, allowing it to sit naturally in the groove. |
| Installing into a dirty or damaged groove. | Thoroughly inspect and clean the mating groove for any debris, burrs, or sharp edges that could compromise the seal. |
A: This Industrial O-Ring, Buna-N is manufactured from Aluminum 6061.
A: Hydraulic and pneumatic cylinders, Fuel and oil systems, Pumps and valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||