This industrial O-ring, constructed with a robust Buna-N elastomer reinforced by Nylon, ensures reliable sealing in challenging operational conditions. Its precise dimensions provide superior performance in dynamic and static sealing applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 1.950" |
| Outside Diameter | 7.470" |
| Cross Section | 0.264" |
Designed for demanding industrial environments, this O-ring utilizes a high-quality Buna-N (Nitrile Butadiene Rubber) compound for excellent resistance to oils, fuels, and hydraulic fluids. The integrated Nylon reinforcement enhances its structural integrity, providing superior extrusion resistance and improved tensile strength for higher pressure applications. With an Inside Diameter of 1.950 inches, an Outside Diameter of 7.470 inches, and a Cross Section of 0.264 inches, this seal is engineered for critical sealing functions in a wide array of industrial machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove surfaces are clean, dry, and free from burrs or sharp edges. 2. Carefully lubricate the O-ring and groove with a compatible lubricant to prevent damage during installation. 3. Gently install the O-ring, ensuring it is seated evenly and without twisting or stretching excessively.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring cuts or tears. | Apply appropriate lubrication and gently work the O-ring into the groove, avoiding any pinching or stretching. |
| Incorrect O-ring size for the groove, causing leaks or premature failure. | Verify that the O-ring's dimensions (ID, OD, CS) precisely match the groove specifications before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Nylon.
A: Hydraulic and pneumatic systems, Automotive and aerospace sealing, Oil and gas exploration equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||