This industrial O-ring, constructed from robust Buna-N material with a carbon steel composition, is engineered for superior sealing performance in high-pressure and harsh industrial settings. Ensures reliable containment of fluids and gases.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 2.371" |
| Outside Diameter | 0.952" |
| Cross Section | 0.241" |
Designed for demanding industrial environments, this Buna-N O-ring boasts a precise Inside Diameter of 2.371 inches, an Outside Diameter of 0.952 inches, and a Cross Section of 0.241 inches. The Buna-N (Nitrile) compound offers excellent resistance to oils, fuels, and many hydraulic fluids, making it suitable for a wide array of applications including hydraulic cylinders, pneumatic actuators, and general fluid power systems. Its carbon steel construction provides enhanced structural integrity and corrosion resistance in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and O-ring are clean and free from debris. 2. Carefully install the O-ring into the designated groove, avoiding stretching or twisting. 3. Apply a thin layer of compatible lubricant to the O-ring and mating surface to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size O-ring, leading to leaks or premature failure. | Verify O-ring dimensions (ID, OD, CS) match the groove specifications precisely. |
| Overstretching or twisting the O-ring during installation, causing damage and compromising the seal. | Install the O-ring without excessive force or deformation, allowing it to seat naturally in the groove. |
| Installing on a dirty or damaged groove, which can lead to leaks and O-ring damage. | Thoroughly clean and inspect the sealing groove for any imperfections before installation. |
A: This Industrial O-Ring, Buna-N is manufactured from Carbon Steel.
A: Hydraulic Systems, Pneumatic Actuators, Fluid Power Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||