This 0.632-inch thick polycarbonate sheet is engineered for demanding suspending and bracing applications. Offering exceptional impact strength and clarity, it's the ideal material for critical structural support.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.632" |
| Length | 46" |
| Width | 34" |
Purpose-built for heavy-duty applications, this 0.632" thick polycarbonate stock sheet (46" L x 34" W) provides unparalleled impact resistance and structural integrity. Manufactured from high-grade polycarbonate, it exhibits excellent thermal stability and UV resistance, ensuring long-term performance in harsh industrial environments. Its inherent toughness makes it ideal for load-bearing bracing, machine guarding, and supporting overhead fixtures where safety and reliability are paramount. The sheet's clarity also allows for visibility when used in protective barriers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean, level, and capable of supporting the applied loads. 2. Accurately mark and pre-drill mounting holes in the polycarbonate sheet, accounting for thermal expansion. 3. Securely fasten the sheet to the mounting surface using appropriate hardware, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to potential cracking. | Maintain a minimum edge distance of 2x the hole diameter for all drilled holes. |
| Not accounting for thermal expansion, causing stress on the sheet and fasteners. | Use oversized holes in the polycarbonate and slotted fasteners to allow for expansion and contraction. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Industrial Machine Guarding, Structural Bracing & Support, Overhead Fixture Suspension, Heavy-Duty Protective Barriers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||